Outdoor Load Break Switch - TENGEN ELECTRIC

PGS-12/24/40.5 Pole-Mounted Load Break Switch

The PGS-12/24/40.5 pole-mounted load switch is suitable for rated voltages of 12kV,24kV,and 40.5kV,with rated current of 400A and 630A.It is designed for breaking and closing load current,overload current in power systems operting at 50/60Hz,automatically isolating faulty sections of distribution lines.The switch can be equipped with an intelligent microcomputer controller,allowing manual operation,electric operation,and remote monitoring and control.

VSP5-12 Series Outdoor High-Voltage Disconnect Vacuum Load Break Switch

FZW28-12F Series Outdoor HV Vacuum Disconnect Load Break Switch

The FZW28-12F outdoor user boundary vacuum load break switch (abbreviated as "FFK") is an outdoor pole-mounted distribution switchgear with a rated voltage of 12kV and a frequency of 50Hz. It utilizes vacuum arc extinction and SF6 gas for both ground and phase-to-phase insulation. The main body of FFK is electrically connected to the FDR-01 fault detector through control cables and is used in conjunction with the front-stage relay. It features fault detection, control protection, and communication functions, enabling automatic disconnection of single-phase ground faults and automatic isolation of phase-to- phase short circuits. FFK is suitable for installation at the responsibility boundary point where 10kV distribution line users enter or at the required T- junctions. It cannot be installed and operated in series! FFK complies with technical standards such as GB3806-2004 and GB/T7261-2008.

FKW18-12/24/40.5 Series Outdoor High-Voltage Load break Switch

The FKW18-12/24/40.5 series switch is a new type of load break switch designed and manufactured by integrating mature domestic load switch production experience and advanced international technology. This load break switch is composed of disconnect blade, vacuum interrupter and operation mechanism. It adopts the principle of pressurized gas for arc extinguishing, featuring simple structure, low maintenance, strong arc extinguishing capability, high level of breaking insulation, and high reliability, reaching the level of similar international products. The switch is suitable for outdoor three- phase AC power distribution systems with a rated voltage below 12kV and a rated frequency of 50Hz, meeting the load current requirements. In the open position, it satisfies the isolation requirements specified for isolating switches.

FZW32-□ Series Outdoor HV V acuum Disconnect Load Break Switch

The FZW32-□/630-20 outdoor high voltage vacuum load break switch is a new type of load switch designed and manufactured by integrating mature experiences from domestic switch production and advanced international technology.This load break switch is composed of disconnect blade,vacuum interrupter and operation mechanism.It adopts the principle of vacuum arc-extinguishing chamber,featuring strong arc-extinguishing capability,reliable performance,long lifespan,small size,no explosion risk,and no pollution.